Crane Inspection & Rocking Test
Crane Inspection & Rocking Test Crane Inspection & Rocking Test Johor Bahru (JB), Malaysia, Skudai Service, Maintenance, Repair | Solas Marine (M) Sdn Bhd
  • Crane Inspection and Recertification
  • Operation test, serving, load test, pull test, rocking test
Rocking test

It is a test which is carried out to find, wear down of the slew bearing of the deck crane on ships. This measures the play (or relative movement) between the inner and outer bearing race, to give an indication of the wear taking place. The Rocking Test need to be carried out according to manufacturer recommendation Measurements are typically taken in four positions on the slew bearing, with the jib pointing. Several slew bearings have failed in recent years with catastrophic results. To avoid these failures it is recommended to carry out the test once in six months. We have competent engineers to conduct this test.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version